Violectric HEADPHONES AMPLIFIER HPA V280

Violectric HEADPHONES AMPLIFIER HPA V280
€1,499.00 *

incl. VAT | Shipping: € 25.00

Colour:

  • V001
  • Violectric
  • approx. 3 - 5 business days
VIOLECTRIC und LAKE PEOPLE handmade in Deutschland , umfangreiches Angebot, warmer, voller und sehr kräftiger Klang, ein Spitzenprodukt in allen Preislagen!
The HPA V280 was developped with the target to enable ultimate transmission quality for low- ,... more
Violectric HEADPHONES AMPLIFIER HPA V280

The HPA V280 was developped with the target to enable ultimate transmission quality for low- , medium- and high-impedance headphones. These may also be balanced versions !! Due to its specific, variable, low-noise and low-distortion circuit design especially optimised for dynamic headphones, the HPA V280 fulfils even highest demands. Like his "bigger brother" HPA V281 also HPA V280 uses our famous V200 amp technology to enable the typical uncolored but smooth sound signature.

LOW-NOISE because of low internal gain. Therefore the self generated noise from the amplifer is not audible.

HIGH OUTPUT VOLTAGE through balanced amp technology. Therefore best suited for high impedance headphones. Over 95 % of all headphone amplifiers in the market offer not half that voltage !!

HIGH OUTPUT POWER because of powerful amplifiers able to deliver much more current a headphone needs. Therefore best suited for low impedance headphones and even magnetostatic cans !!

HIGH DAMPING FACTOR through lowest output impedance. Therefore best suited for full control even over critical headphones with the garantee to have flatest possible response.

Features:

  • Balanced inputs with gold-plated Neutrik XLR connectors
  • Unbalanced inputs with gold-plated ALPS RCA connectors
  • switchable unbalanced outputs with RCA connectors
  • optional digital input (USB or Coax or Optical)96 or 192 kHz
  • PRE-GAIN = switchable input gain in five steps
  • Independent-channel design
  • ALPS RK27 High-Grade volume control
  • High-Quality op-amps in the signal path
  • High-quality MKP capacitors in the signal path
  • 0.1 and 1% metal film resistors throughout the unit
  • 4 amplifiers with V200 technology
  • 1 balanced headphone output, Neutrik 4-pin, gold plated
  • 2 single ended silver-plated Neutrik headphone outputs
  • Relay-based headphone output cutoff
  • 2 large toroidal transformers
  • Large filtering capacitors in the power supply
  • Switchable ground lift
  • Rugged aluminium case with Nextel coating
  • Solid, laser-engraved aluminium front panel

The four built-in amplifiers provide balanced operation of headphones !! Connection is made via 4-pin Neutrik XLR connectors. Two “standard” headphones may be connected via 1/4" jacks on the front panel. This amp may be equipped with one of six different digital inputs: Coaxial, Optical or USB with either 24/96 kHz or 24/192 kHz Case and back panel are made of aluminium and are Nextel coated. The 8 mm frontpanel is black or silver anodized. The labeling is laser engraved.

Technical Data

  • Balanced Inputs: 2, gold plated XLR connectors
  • Unbalanced Inputs: 2, gold plated RCA conncetors
  • Impedance: 10 kohms
  • Unbalanced Line Outputs: 2, gold plated RCA connectors
  • Amplifier Channels: 4 (Stereo Push-Pull)
  • Nom. input level: + 6 dBu
  • Amplifier Gain: +8 dB
  • ... with PRE-GAIN: -4 / +2 / +8 / +14 / +20 dB
  • Frequency range: 0 Hz ... 60 kHz (-0,5 dB)
  • Output Impedance: 0,165 Ohms
  • Damping Factor @5 0 Ohm: 300
  • Dynamic range: > 129 dB (A-wtd)
  • Noise: < -97 dBu (A-wtd)
  • THD+N: < -102 dB @ 10V in 100 Ohms (1W) < -99 dB @ 4V in 32 Ohms (0,5W)
  • Crosstalk: < -115 / -105 dB (@ 1 / 15 kHz)
  • Max. output level (bal. mode): > 32,9 Veff in 600 ohms = 1800 mW > 28,2 Veff in 300 ohms = 2650 mW > 23,0 Veff in 100 ohms = 5300 mW > 12,4 Veff in 50 ohms = 3100 mW > 9,1 Veff in 32 ohms = 2600 mW > 4,9 Veff in 16 ohms = 1500 mW
  • unbalanced Outputs: 2 x 1/4" phone jacks
  • balanced output 1, gold plated 4-pin XLR connector
  • Power supply: 230 / 115 V AC 30 VA
  • Dimensions: 170 x 49 x 320 mm (W x H x D)
  • Case Material: Aluminum
Related links to "Violectric HEADPHONES AMPLIFIER HPA V280"
Read, write and discuss reviews... more
Customer evaluation for "Violectric HEADPHONES AMPLIFIER HPA V280"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

I have read the data protection information.

SPL Phonitor x Headphone Amplifier SPL Phonitor x Headphone Amplifier
€1,999.00 * €2,399.00 *
Audio-Technica Headphone ATH ADX5000 Audio-Technica Headphone ATH ADX5000
€1,890.00 * €2,199.00 *
Viewed